Emerson R&S SGT100A User Manual page 496

®
R&S SGT100A
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:SCALe <Scale>
Determines the units used on the x and y axis.
Parameters:
<Scale>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:GAIN:PRE <PreGain>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:GAIN:POST
Sets a post-gain.
Parameters:
<PostGain>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:FILE:CATalog?
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:PV:FILE:CATalog?
Queries the available table shaping files in the default directory. Only files with the file
extension *.iq_lut or *.iq_lutpv are listed.
Return values:
<Catalog>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:FILE[:SELect]
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:PV:FILE[:SELect]
Selects an envelope shaping file (extension *.iq_lut or *.iq_lutpv).
User Manual 1176.8674.02 ─ 12
POWer | VOLTage
*RST:
See Example"Generating an RF envelope signal and defining
the shaping function"
See "Scale"
<PostGain>
float
Range:
Increment: 1E-2
*RST:
See Example"Generating an RF envelope signal and defining
the shaping function"
See "Post-Gain"
string
See Example"Generating an RF envelope signal and defining
the shaping function"
Query only
See "Shaping Table"
<Filename>
<Filename>
Remote control commands
VOLTage
on page 485
on page 194
-3 to 20
0
on page 485
on page 192
on page 485
on page 193
SOURce subsystem
496