Emerson R&S SGT100A User Manual page 379

®
R&S SGT100A
Setting parameters:
<IP>
Example:
Usage:
Manual operation:
:SLISt:SCAN:USENsor <DeviceID>, <Serial>
Scans for R&S NRP power sensors connected over a USB interface.
Parameters:
<Serial>
Setting parameters:
<DeviceID>
Example:
Usage:
Manual operation:
:SLISt:CLEar:LAN
Removes all R&S NRP power sensors connected in the LAN from the list.
Example:
Usage:
Manual operation:
:SLISt:CLEar:USB
Removes all R&S NRP power sensors connected over USB from the list.
Example:
Usage:
Manual operation:
User Manual 1176.8674.02 ─ 12
SENSe, READ, INITiate and SLISt subsystems
string
*RST: 0
See Example"Detecting and assigning a power sensor"
on page 376.
Setting only
See "Add LAN Sensor settings"
integer
Range: 0 to 999999
String or Integer
Range: 0 to 999999
*RST: 0
See Example"Detecting and assigning a power sensor"
on page 376.
Setting only
See "Add USB Sensor settings"
See Example"Detecting and assigning a power sensor"
on page 376.
Event
See "Clear" on page 254
See Example"Detecting and assigning a power sensor"
on page 376.
Event
See "Clear" on page 254
Remote control commands
on page 254
on page 255
379