Emerson R&S SGT100A User Manual page 523

®
R&S SGT100A
Manual operation:
[:SOURce]:POWer:POWer <Amplitude>
Sets the level at the RF output connector.
This value does not consider a specified offset. The command
LEVel][:IMMediate][:AMPLitude]
means the level containing offset.
Parameters:
<Amplitude>
Example:
Manual operation:
[:SOURce]:POWer:PEP?
Queries the RF signal peak envelope power.
Return values:
<PEP>
Usage:
[:SOURce]:POWer:SCHaracteristic <Characteristic>
Selects the characteristic for the level setting.
Parameters:
<Characteristic>
User Manual 1176.8674.02 ─ 12
NORM
automatic selection of the best settings
LNOISe
settings for lowest noise
LDIStortion
settings for lowest distortions
*RST: n.a. (factory preset: NORMal)
See "Mode" on page 226
sets the level of the "Level" display, that
float
Range: -20 to 25
Increment: 0.01
*RST: -10
POW:POW 15
sets the RF level at output to 15 dBm.
See "Level/Level Offset"
float
Query only
AUTO | UNINterrupted | CVSWr | USER | MONotone
UNINterrupted
uninterrupted level setting
CVSWr
constant-VSWR
MONotone
strictly monotone
Remote control commands
SOURce subsystem
[:SOURce]:POWer[:
on page 68
523