Emerson R&S SGT100A User Manual page 498

®
R&S SGT100A
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:
Queries the available polynomial files in the default directory. Only files with the file
extension *.iq_poly are listed.
Return values:
<Catalog>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:STORe
Saves the polynomial function as polynomial file.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:LOAD
Loads the selected polynomial file.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
User Manual 1176.8674.02 ─ 12
See Example"Generating an RF envelope signal and defining
the shaping function"
See "Polynomial Order"
See "Polynomial constant and coefficients"
See "Apply, OK"
CATalog?
string
See Example"Generating an RF envelope signal and defining
the shaping function"
Query only
See "Save/Recall Polynomial"
<Filename>
string
See Example"Generating an RF envelope signal and defining
the shaping function"
Setting only
See "Save/Recall Polynomial"
<Filename>
string
See Example"Generating an RF envelope signal and defining
the shaping function"
Setting only
See "Save/Recall Polynomial"
Remote control commands
on page 485
on page 197
on page 197
on page 485
on page 197
on page 485
on page 197
on page 485
on page 197
SOURce subsystem
on page 197
498