Connector Extension Unit (R&S Sgt-B88) - Emerson R&S SGT100A User Manual

®
R&S SGT100A
3.2.3 Connector extension unit (R&S SGT-B88)
This chapter provides an overview of control elements and connectors of the R&S SGT
connector extension unit.
Order the R&S SGT connector extension unit R&S SGT-B88 together with a new
R&S SGT instrument.
You cannot extend an existing R&S SGT unit.
3.2.3.1 Front panel
This section provides an overview of the connectors on the front panel of the extension
unit. For an overview of the front panel connectors of the R&S SGT, refer to
ter 3.2.1, "Front panel
Figure 3-5: R&S SGT connector extension unit: controls and connectors
1 = R&S SGT
2 = RF 50Ω, page 37
RF 50Ω
N-type connector for a 50 Ohm RF signal output.
How to:
3.2.3.2 Rear panel
This section provides an overview of the connectors on the rear panel of the extension
unit.
For an overview of the connectors of the rear panel of R&S SGT, refer to
ter 3.2.2, "Rear panel
User Manual 1176.8674.02 ─ 12
tour", on page 33.
1
2
front panel controls, page 33
Chapter 3.1.8, "Connecting to RF
tour", on page 35.
50Ω", on page 22
Getting started
Instrument tour
Chap-
Chap-
37