Advanced Remote Control Using Pcie - Emerson R&S SGT100A User Manual

®
R&S SGT100A
The socket address is a combination of the IP address or the host name of the
R&S SGT and the number of the port configured for remote-control via telnet.
Tip: The R&S SGT uses the port number 5025 for remote connection via Telnet.
The connection to the instrument is set up and remote-control commands can be
sent.
3. Even if the cursor is not visible on the screen, enter blind a remote-control com-
mand.
4. Confirm with "Enter".

9.3 Advanced remote control using PCIe

The PCIe bus is a high-speed serial bus, composed of point-to-point serial links. A pair
of serial links, one transmitting and one receiving link, make up a lane.
Fast settings
The PCIe interface can be utilized not only to transfer text messages, e.g., SCPI com-
mands but also to carry register based remote control messages. The latter mode is
User Manual 1176.8674.02 ─ 12
Network operation and remote control
Advanced remote control using PCIe
322