Emerson R&S SGT100A User Manual page 261

®
R&S SGT100A
Mode
Selects the mode for the correspondent connector. Some settings are only available for
connector "USER 2".
"Marker 1/2"
"Trigger/ Trigger Out"
"Clock In/Out"
"Sync In/Out"
"Next Trigger"
"Signal Valid"
"Not Signal Valid"
"Pulse Video Out"
"Pulse Gen Ext Trigger"
User Manual 1176.8674.02 ─ 12
Output for a defined marker signal.
Input/output for an external trigger signal.
Input/Output for a clock signal.
Input/Output for SYNC signals used for SYNC-Mode in baseband.
Input next segment for triggering of multi-segment waveform files.
Output of high signal to mark valid frequency and level settings.
Output of high signal to mark the transition state when frequency and
level change.
Available only for "USER 2".
Output of the internally generated pulse video (modulating) signal.
The video signal level corresponds to the RF envelope.
Available only for "USER 2".
Input for an external trigger signal, used to trigger the pulse genera-
tor.
Signal generator settings
Connectors
261