Emerson R&S SGT100A User Manual page 435

®
R&S SGT100A
Example:
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DATA <Filename>, <Data>
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DATA? <Tag>
The setting command writes the binary block data <data> to the file identified by
<filename>. The complete content of the waveform file is transmitted as a binary
data block.
The query command retrieves the content of the specified tag of the currently selected
waveform file or the waveform file specified with the <filename>.
By default, the waveform files are saved in the default directory of the instrument (/
var/instrument/Lists).
To access waveform files located in another directory, the complete file path and file
name are required.
Parameters:
<Filename>
Setting parameters:
<Data>
Query parameters:
<Tag>
Example:
Example:
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DELete <Filename>
Deletes the specified waveform file. If the file is not on the default path, the path must
be specified at the same time. The file extension may be omitted. Only files with the file
extension *.wv will be deleted.
User Manual 1176.8674.02 ─ 12
see
:MMEMory:DATA:UNPRotected
string
Specifies the name of the waveform file the binary data will be
copied to.
The file extension (.wv) may be omitted.
block data
Contents of the waveform file as a definite length binary block.
'comment' | 'copyright' | 'date' | 'lacpfilter' | 'marker name' |
'poweroffset'
Indentifier of the tag which shall be retrieved from the waveform
file.
Setting
BB:ARB:WAV:DATA "/var/sgt/temp/test1", <bin
data block>
writes the block data to file 'test1.wv' in the /var/
instrument/Lists directory.
Query
BB:ARB:WAV:DATA? '/var/user/wave1.wv','comment'
queries the content of the 'comment' tag of file wave1.wv in
directory /var/user
Response: " #222Sinusoidal test signal"
Remote control commands
SOURce subsystem
on page 368
435