Standby And Restart; Diagnostic And Tests - Emerson R&S SGT100A User Manual

®
R&S SGT100A
2. Select "Execute Factory Preset".
The instrument's settings are reset to their factory states. Security settings and
user data are not affected.
Settings:
Execute Factory
Execute Factory Preset
Reset the instrument's settings to their factory state.
Note: Because "Factory Preset" resets the "Remote Channel Settings" and "Network
Settings" to the default values, executing factory preset via remote control can termi-
nate the connection to the instrument, if these settings had been configured to values
different to the default ones.
The factory preset function resets nearly all instrument settings. In addition to the regu-
lar preset, a "Factory Preset" resets also the following values:
●
Power on settings ("Level" dialog)
●
Network settings including hostname ("Setup > Network Setting" dialog)
●
Remote Channel settings ("Setup > Remote Channel" dialog)
To maintain security, password settings and all settings protected by these passwords
like disabled USB and LAN connections are not changed.
Not affected by the "Factory Preset" are also user data, lists or instrument settings
files, created, for example, with the "File Save As" function and currently saved on the
instrument's hard disc.
Remote command:
:SYSTem:FPReset

7.13 Standby and restart

See

7.14 Diagnostic and tests

This section describes the settings provided for diagnostic and test purposes.
User Manual 1176.8674.02 ─ 12
Preset...............................................................................................295
on page 354
Chapter 8.7, "How to switch between operating
General instrument settings and instrument setup
states",

Diagnostic and tests

on page 306.
295