®
R&S
SGT100A
Carrier + Noise Power / Signal + Noise Power (System Bandwidth) / Carrier +
Interferer Power / Signal + Interferer Power
Available only for "Mode > Additive Noise" and "Mode > CW Interferer".
Displays the overall power of the noise/interferer signal plus useful signal.
The output selected with the parameter
●
The name of this parameter
●
The units the overall power is measured in, dBm or dB (full scale)
Remote command:
[:SOURce<hw>]:AWGN:POWer:SUM?
Carrier + Noise PEP / Signal + Noise PEP (Total Bandwidth) / Carrier + Interferer
PEP / Signal + Interferer PEP
Available only for "Mode > Additive Noise" and "Mode > CW Interferer".
Displays the peak envelope power (PEP) of the overall signal comprised of noise sig-
nal plus useful signal.
The output selected with the parameter
●
The name of this parameter
●
The units the overall power is measured in, dBm or dB (full scale)
Note: The peak envelope power ("PEP") displayed in the "Status bar" corresponds to
the PEP value of the carrier.
Remote command:
[:SOURce<hw>]:AWGN:POWer:SUM:PEP?
6.3 I/Q modulation and impairment settings
6.3.1 I/Q modulation
The R&S SGT offers I/Q modulation with:
●
External analog I/Q signals,
●
External digital signals,
●
Internal digital signals.
Either the external digital signal or the externally/internally generated baseband signal
is fed into the I/Q modulator ("I/Q Mod" function block).
The external signal is input via the I and Q connector and transferred directly to the I/Q
modulator ("I/Q Mod" function block). The external digital signal is configured in the
"BB In" function block (see
on page 262).
User Manual 1176.8674.02 ─ 12
I/Q modulation and impairment settings
Display Mode
on page 398
Display Mode
on page 399
Chapter 6.9, "External baseband signal - baseband
Signal generator settings
determines:
determines:
input",
150