Emerson R&S SGT100A User Manual page 497

®
R&S SGT100A
Parameters:
<Filename>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:FILE:DATA
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:PV:FILE:DATA
Defines the shaping function in a raw data format.
See also
FILE:NEW
Example:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:FILE:NEW
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:PV:FILE:NEW
Stores the shaping values into a file with the selected file name and loads it.
The file is stored in the default directory or in the directory specified with the absolute
file path. If the file does not yet exist, a new file is created. The file extension is
assigned automatically.
Example:
Usage:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:INTerp <Interpolation>
For envelope shaping with shaping tables, enables linear interpolation.
Parameters:
<Interpolation>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients
Sets the polynomial coefficients.
User Manual 1176.8674.02 ─ 12
string
See Example"Generating an RF envelope signal and defining
the shaping function"
See "Shaping Table"
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:PV:
on page 497.
See Example"Generating an RF envelope signal and defining
the shaping function"
See Example"Generating an RF envelope signal and defining
the shaping function"
Setting only
OFF | LINear | POWer
LINear = Linear (Voltage)
POWer = Linear (Power)
*RST:
See Example"Generating an RF envelope signal and defining
the shaping function"
See "Interpolation"
Remote control commands
on page 485
on page 193
on page 485
on page 485
OFF
on page 485
on page 193
SOURce subsystem
497