External Adjustments - Emerson R&S SGT100A User Manual

®
R&S SGT100A
The dialog displays a list of software options.
5. Enable the option to be simulated.
The block diagram and the provided signal generator settings are updated accord-
ingly. You can open dialogs, interact with functions or observe the influence of set-
tings as if the virtual instrument is equipped with the selected options.
The signal generation function is disabled. The dialog and all unlicensed settings
disappear, if a connection to a physical instrument is detected.

7.15 External adjustments

The external adjustment is a protected service procedure that requires
Level 2"
Access:
► Select "SGMA-GUI > Instrument Name > Service > External Adjustments".
Depending on the installed options, the R&S SGT is equipped with a TCXO or OCXO
reference oscillator. The reference oscillator is factory calibrated to a specific calibra-
User Manual 1176.8674.02 ─ 12
password. For a detailed test procedure, see the R&S SGT service manual.
General instrument settings and instrument setup

External adjustments

"Protection
300