®
R&S
SGT100A
Manual operation:
:INSTruments:CLEar
Clears all instruments in the device list.
Parameters:
<Count>
Example:
Usage:
:INSTruments:COUNt?
Queries the number of the currently available instruments.
Return values:
<Count>
Example:
Usage:
Manual operation:
:INSTruments:EACCess[:STATe] <State>
"Locks" the instruments, meaning the instrument is reserved and can be operated
exclusively from the remote PC that sent this SCPI command.
Tip: It is recommended to lock the instrument prior to further configuration.
Parameters:
<State>
Example:
Manual operation:
:INSTruments:GPIB:ADDRess <Serial>
Sets the GPIB address of the connected instrument.
Parameters:
<Serial>
Example:
User Manual 1176.8674.02 ─ 12
See
"Available Instruments"
See
"Active"
on page 60
float
Range:
0 to 12
See
Example"Configuring SGMA instruments"
Event
float
Range:
0 to 12
See
Example"Searching for SGMA instruments"
Query only
See
"Available Instruments"
List of BOOL-values
<LockInstr#1>,<LockInstr#2>,...
0,1,OFF,ON
See
Example"Evaluating scan results"
See
"Exclusive Access"
List of Numbers
See
Example"Configuring SGMA instruments"
Understanding R&S SGMA-GUI
Remote control of R&S SGMA-GUI
on page 57
on page 57
on page 78.
on page 60
on page 79.
on page 77.
on page 79.
80