Emerson R&S SGT100A User Manual page 234

®
R&S SGT100A
"Delete Range..."
"Save as"
"Save"
Remote command:
[:SOURce<hw>]:CORRection:CSET[:SELect]
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency
[:SOURce<hw>]:CORRection:CSET:DATA:POWer
Import/Export >>>
Expands the menu with the area for import and export of user correction files.
Externally edited Excel tables with any number of frequency/level value pairs can be
imported as text or *.csv files and used for user correction.
Conversely, you can also export internally created user correction lists as text or
*.csv files.
Mode - User Correction
Selects if user correction lists are imported or exported. The settings offered depend
on the selected mode.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:MODE
Extension
Selects the file extension of the ASCII file to be imported or exported. Selection "TXT"
(text file) or "CSV" (Excel file) is available.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension
Decimal Point
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
User Manual 1176.8674.02 ─ 12
Allows you to delete any number of rows starting with the marked
row. The number of rows to be deleted can be defined in an entry
window.
Open the file menu to save the list under a new name.
Note: Save list only after filling both columns (frequency and level),
otherwise the entries are lost.
Each list is saved to the R&S SGT hard disk as a separate file with
the file prefix *.uco. The file name and the directory to which the file
is saved are user-selectable.
The list is saved under its current name.
Signal generator settings
RF settings
on page 476
on page 470
on page 471
on page 475
on page 473
234