Emerson R&S SGT100A User Manual page 277

®
R&S SGT100A
An option is ready to operate after it is enabled by a license key code supplied with the
option. The license key is delivered as a file or on paper. Unregistered licenses must
be registered for a particular instrument before the corresponding option can be
enabled for operation.
License registration
If your purchased license is delivered unregistered, you must register it before you can
activate the option.
For detailed information about the license registration, refer to the installation instruc-
tions provided with the option (Supplement A) and the documentation of the online tool
"Manage Licenses" (https://extranet.rohde-schwarz.com/service).
Only if the R&S SGT is equipped with an older firmware version, a firmware update
before enabling the software option can be required. The information on the valid firm-
ware versions for the purchased software option is provided together with the option.
Example: Moving a portable license
This example is intended to explain how to perform the required steps at the instru-
ment.
Use a USB flash drive to transfer the license key files between the instrument and the
browser.
We assume knowledge about the handling of the R&S License Manager online tool
and the description of the whole process.
1. In your browser, open https://extranet.rohde-schwarz.com/service.
Select "Manage Licenses > Move Portable License".
The first step requires the device IDs of the source and target instruments.
2. To find out the device IDs, proceed as follows:
User Manual 1176.8674.02 ─ 12
General instrument settings and instrument setup
Manage license keys
277