Emerson R&S SGT100A User Manual page 288

®
R&S SGT100A
Hostname
Displays the individual computer name of the instrument.
A predefined name is indicated and can be used for network connections, see
ter 5.5.3, "Finding out the default hostname of the
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors can affect the entire network.
Remote command:
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname
MAC Address
Indicates the MAC address of the network adapter.
Address Mode
Selects if the IP address is assigned automatically or manually.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors can affect the entire network.
Note: Lost LAN connection to an instrument.
If the connection to an instrument configured to use static IP addresses is lost, press
the [LAN LED] on the instrument front panel.
Pressing triggers a reset of the assignment mode ("Address Mode > Auto (DHCP)".
"Auto (DHCP)"
"Static"
Remote command:
:SYSTem:COMMunicate:NETWork:IPADdress:MODE
IP Address
Displays the IP address. To enter the IP address manually, select "Address Mode >
Static".
If there is manual input of the IP address, it is recommended that a connection of the
instrument to the network is coordinated with the network administrator. Connection
errors can affect the entire network.
Remote command:
:SYSTem:COMMunicate:NETWork:IPADdress
Subnet Mask
Displays the subnet mask. This number is used together with the IP address to identify
the network segment the instrument is in.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors can affect the entire network.
To enter the subnet mask manually, select "Address Mode > Static".
Note: When assigning the subnet mask manually, make sure that the address matches
with the subnet mask of the controlling host interface.
User Manual 1176.8674.02 ─ 12
General instrument settings and instrument setup
The IP address is assigned automatically.
The network used must support automatic assignment of IP address
via DHCP or APIPA (Zeroconf) to use this function.
The IP address is assigned manually.
Network settings
instrument", on page 74.
on page 540
on page 539
on page 539
Chap-
288