Table of Contents
Advertisement
®
R&S
SGT100A
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SELect <Filename>
Selects the configuration file in the default directory.
A path can also be specified, in which case the files in the specified directory are
selected. If a configuration file with the specified name does not yet exist, it is created.
The file extension may be omitted. Only files with the file extension *.inf_mswv will
be selected or created.
Parameters:
<Filename>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate <FilenameInput>
Creates a multi segment waveform using the current settings of the specified configu-
ration file. The multi segment waveform is saved into the file defined in the configura-
tion file. The file extension is *.wv.
Setting parameters:
<FilenameInput>
Example:
Usage:
Manual operation:
User Manual 1176.8674.02 ─ 12
See
"Append"
on page 99
string
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'new'
create configuration file new.inf_mswv in the default directory.
See
"New List"
on page 96
See
"Load List"
on page 96
string
MMEM:CDIR '/var/user/'
sets the default directory
BB:ARB:WSEG:CONF:SEL 'new'
creates the configuration file new.inf_mswv in the default
directory.
BB:ARB:WSEG:CONF:SEGM:APP 'arb1.wv'
'includes waveform arb1.wv as segment 1 in the configuration
file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:OFIL 'multi_wv1'
defines the file name multi_wv1.wv for the multi segment
waveform.
BB:ARB:WSEG:CRE '/var/user/new.inf_mswv'
creates multi segment waveform multi_wv1.wv using the set-
tings of the configuration file new.inf_mswv.
Setting only
See
"Save List"
on page 96
See
"Create"
on page 96
Remote control commands
SOURce subsystem
445
Advertisement
Chapters
Table of Contents
