Trigger, Marker And Clock Settings - Emerson R&S SGT100A User Manual

®
R&S SGT100A
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate

6.1.3 Trigger, marker and clock settings

6.1.3.1 Trigger in settings
Access:
► Select "SGMA-GUI > Instrument Name > Baseband > ARB > Trigger In".
The "Trigger In" section is where the trigger for the signal is set. Various parame-
ters are provided for the settings, depending on which trigger source - internal or
external - is selected. The status of signal generation ("Running" or "Stopped") is
indicated for all trigger modes.
Settings:
Trigger
Signal Duration
Signal
Running/Stopped........................................................................................................ 122
Arm..............................................................................................................................123
Execute
Trigger
Sync. Output to External
External Delay
Trigger
Actual Trigger
Trigger
Trigger Mode
Selects trigger mode.
The trigger mode determines the effect of a trigger on the signal generation.
User Manual 1176.8674.02 ─ 12
Mode............................................................................................................... 121
Unit.................................................................................................... 122
Duration............................................................................................................122
Trigger........................................................................................................... 123
Source.............................................................................................................123
Trigger................................................................................. 123
Unit..................................................................................................... 124
Delay...............................................................................................................124
Delay....................................................................................................124
Inhibit.............................................................................................................. 124
Signal generator settings
Baseband
on page 415
on page 415
on page 415
121