Emerson R&S SGT100A User Manual page 81

®
R&S SGT100A
Manual operation:
:INSTruments:GPIB:BOARd <Board>
Identifies the GPIB bus card the controller uses.
Parameters:
<Board>
Example:
Manual operation:
:INSTruments:MAPPing:FILE <File>
Saves the list of the available instruments in a mapping file. Mapping files are stored
with the predefined file extension .map; the file extension may be omitted.
The file is saved in the default directory. Use the command MMEM:CDIRectory to
change the default directory or specify the complete path.
Parameters:
<File>
Example:
Manual operation:
:INSTruments:NAME <Name>
Selects the alias name of the instruments, i.e. sets the "Symbolic Name".
Parameters:
<Name>
Example:
Manual operation:
:INSTruments:REMote:CHANnel <Channel>
Sets the hardware interface used by the remote channel.
Parameters:
<Channel>
Example:
Manual operation:
User Manual 1176.8674.02 ─ 12
See "GPIB Address" on page 61
List of Numbers
See Example"Configuring SGMA instruments"
See "Board Number" on page 61
string
See Example"Evaluating scan results"
See "Export" on page 57
<SymbolicNameInstr#1>,<SymbolicNameInstr#2>,...
See Example"Searching for SGMA instruments"
See "Available Instruments"
See "Symbolic Name"
List of CHAR-Data
<Channellnstr#1>,<Channellnstr#2>,...
The available interfaces are: LAN, USB, SOCKET, PCIe, GPIB,
HiSLIP
See Example"Searching for SGMA instruments"
See "Hardware Channel"
Understanding R&S SGMA-GUI
Remote control of R&S SGMA-GUI
on page 78.
on page 57
on page 60
on page 61
on page 79.
on page 77.
on page 77.
81