Table of Contents
Advertisement
®
R&S
SGT100A
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:STATe <State>
The command switches all the carriers in the selected carrier range on or off.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:OFILe <OFile>
This command defines the output file name for the multi carrier waveform. This file
name is used when a waveform is calculated (command SOUR:BB:ARB:MCAR:CLOad
or SOUR:BB:ARB:MCAR:CREate). The file extension is *.wv.
Parameters:
<OFile>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:PRESet
Sets all ARB multi carrier parameters to their default values.
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SAMPles?
The command queries the resulting file size. The file size is returned in samples.
Return values:
<Samples>
User Manual 1176.8674.02 ─ 12
BB:ARB:MCAR:EDIT:CARR:STOP 4
the carrier range stops at carrier 4.
See
"Carrier Stop"
on page 113
0 | 1 | OFF | ON
*RST:
1
BB:ARB:MCAR:EDIT:CARR:STAT ON
sets all the carriers in the carrier range to ON.
See
"Carrier State"
on page 113
string
MMEM:CDIR "/var/user/waveform"
sets the default directory.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name mcar1_2.wv for the multi carrier wave-
form file
See
"Output File"
on page 110
SOURce1:BB:ARB:MCARrier:PRESet
Event
See
"Set to Default"
on page 105
integer
Range:
0 to INT_MAX
*RST:
0
Remote control commands
SOURce subsystem
430
Advertisement
Chapters
Table of Contents
