Emerson R&S SGT100A User Manual page 133

®
R&S SGT100A
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DELay:MINimum?
on page 407
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DELay:MAXimum?
on page 407
Fix marker delay to current range
Restricts the marker delay setting range to the dynamic range. In this range, the delay
can be set without restarting the marker and signal.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut:DELay:FIXed
6.1.3.4 Clock settings
Access:
► Select "SGMA-GUI > Instrument Name > Baseband > ARB > Marker".
In the dialog, you can set the clock source and a delay.
Settings:
Sync
Clock
Clock
Sample Clock
Measured External
Synchronisation
Sync Mode
Selects the synchronization mode.
"None"
"Sync Primary" The instrument provides all connected instrument with its synchroni-
"Sync Secondary"
User Manual 1176.8674.02 ─ 12
Mode.................................................................................................................. 133
Source...............................................................................................................134
Mode................................................................................................................. 134
Multiplier...............................................................................................134
Clock............................................................................................ 134
State................................................................................................. 134
The instrument is working in stand-alone mode.
zation (including the trigger signal) and reference clock signal.
The instrument receives the synchronization and reference clock sig-
nal from another instrument working in a primary instrument mode.
Signal generator settings
Baseband
on page 414
133