®
R&S
SGT100A
6 Signal generator settings
This section summarizes the settings necessary to configure the instrument for signal
generation. The description in this section follows the menu tree structure of the graph-
ical user interface.
6.1 Baseband
6.1.1 System configuration
Access:
► Select "SGMA-GUI > Instrument Name > Baseband > System Configuration".
In the "System Configuration" dialog, you can select the signal settings. Depending on
the selected settings the signal flow block diagram can look different, see
Table 6-1: System configuration modes
"Standard"
"ARB for Envelope Tracking"
User Manual 1176.8674.02 ─ 12
Signal generator settings
Baseband
Table
6-1.
85