Emerson R&S SGT100A User Manual page 40

®
R&S SGT100A
3. In the R&S SGMA-GUI main panel, the green indicator in front of the name of the
instrument confirms an active connection.
The software recognizes the instrument and displays the connection state between
the instrument and the remote PC.
4. In the R&S SGMA-GUI main panel, select the row of the instrument, that you want
to configure.
5. Select "Instrument Name > Preset" to restore the predefined instrument's settings.
6. In the R&S SGMA-GUI main panel, select the row of the instrument that you want
to configure.
7. Set the "Frequency" as required.
8. Select "SGMA-GUI > RF On" to enable the output of the CW signal.
User Manual 1176.8674.02 ─ 12
Getting started
Trying out the instrument
40