Emerson R&S SGT100A User Manual page 301

®
R&S SGT100A
tion value. In the external adjustment dialog, you can select a different (custom) cali-
bration value.
Settings:
Active Adjustment
Calibration
Active Adjustment Data
Selects whether the factory provided or a user-defined calibration value is used to
adjust the reference oscillator.
Remote command:
:CALibration:ROSCillator:DATA:MODE
Calibration Value
Sets a user-definable calibration value.
The permanent storage of this value in the instrument's memory is a password-protec-
ted function. The parameter is restored to its permanently stored value by "Preset" and
instrument restart.
Remote command:
:CALibration:ROSCillator[:DATA]
User Manual 1176.8674.02 ─ 12
General instrument settings and instrument setup
Data...............................................................................................301
Value......................................................................................................... 301
External adjustments
on page 357
on page 357
301