Settings: Current Segment - Emerson R&S SGT100A User Manual

®
R&S SGT100A
In the "Retrigger" mode, every trigger signal causes signal generation to restart. This
restart is inhibited for the specified number of samples.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:INHibit
on page 411
6.1.3.2 Next segment trigger in settings
The section "Next Segment Trigger In" of the menu is only displayed if a multi-segment
waveform is loaded.
The section comprises the settings necessary to adjust the trigger for the switch
between the segments of a multi-segment waveform. The parameters displayed
depend on the selected trigger source.
Settings:
Current
Next
Next Segment
Execute Next
Sequencing
Trigger
Current Segment
Indication of the waveform segment (segment filename and index) that is output.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
User Manual 1176.8674.02 ─ 12
Segment.........................................................................................................125
Segment............................................................................................................. 126
Mode................................................................................................... 126
Segment............................................................................................... 130
List...........................................................................................................130
Example.......................................................................................................... 131
Signal generator settings
on page 438
on page 446
Baseband
125