Emerson R&S SGT100A User Manual page 62

®
R&S SGT100A
5.1.2.3 Software
To find out the software version and installed options
► Select "Setup > Software".
The dialog provides information on the software opens showing program informa-
tion.
Software
Displays information on:
"Package"
"Version"
Show Open Source Acknowledgments
Accesses the list of the used open source software packages and the corresponding
verbatim license texts.
Versions
Shows the installed software platform and its version.
5.1.2.4 Reset SGMA-GUI
Resets R&S SGMA-GUI to its factory preset settings.
The connected instruments are not affected by this preset.
To preset one specific instrument to its factory preset settings, select "SGMA-GUI >
Instrument Name > Setup > Factory Preset". Refer to
on page 294 for an overview of the settings affected by this function.
5.1.2.5 Protection
The "Protection" dialog is available for R&S SGS and R&S SGT. It provides settings to
unlock protected service functions (authorized personnel of Rohde & Schwarz service
departments only).
User Manual 1176.8674.02 ─ 12
Installed software packages.
Release of the software package.
Understanding R&S SGMA-GUI
Operating menu and toolbar
Chapter 7.12, "Factory preset",
62