Emerson R&S SGT100A User Manual page 63

®
R&S SGT100A
Unlocking of protected service functions
1. Select "SGMA-GUI > Setups > Protection".
After the instrument has been switched on, the protection levels 1 to 4 are auto-
matically activated.
2. To deactivate the protection, enter the correct password.
Enter "Protection Level 1" > "Password" > "123456".
Protection Level 1 is activated.
Protection Level / Password
"Protection Level 1" can be activated to expand the functionality of the internal adjust-
ment. The password is 123456.
The other protection levels 2 to 4 provide access to protected service functions. Only
the authorized personnel of Rohde & Schwarz service departments can access these
functions.
5.1.2.6 Remote
Access: "SGMA-GUI" > "Setup" > "Remote".
SCPI Port
Sets the port number of the LAN interface for remote control with TCP/IP socket proto-
col.
Set different port numbers to control different software from the same application, e.g.
R&S SGMA-GUI and R&S WinIQSIM2.
Remote command:
:SYSTem:COMMunicate:SOCKet:PORT
User Manual 1176.8674.02 ─ 12
Understanding R&S SGMA-GUI
Operating menu and toolbar
on page 543
63