Emerson R&S SGT100A User Manual page 349

®
R&S SGT100A
*CLS
Clear status
Sets the status byte (STB), the standard event register (ESR) and the EVENt part of
the QUEStionable and the OPERation registers to zero. The command does not
alter the mask and transition parts of the registers. It clears the output buffer.
Usage:
*ESE <Value>
Event status enable
Sets the event status enable register to the specified value. The query returns the con-
tents of the event status enable register in decimal form.
Parameters:
<Value>
*ESR?
Event status read
Returns the contents of the event status register in decimal form and then sets the reg-
ister to zero.
Return values:
<Contents>
Usage:
*IDN?
Identification
Returns the instrument identification.
Return values:
<ID>
Example:
Usage:
Manual operation:
*IST?
Individual status query
User Manual 1176.8674.02 ─ 12
Setting only
Range: 0 to 255
Range: 0 to 255
Query only
"Rohde&Schwarz,<device type>,<part number>/<serial num-
ber>,<firmware version>"
Rohde&Schwarz,SGT100A,
1412.0000K02/000000,3.1.17.1-03.01.158
Query only
See "IDN String" on page 293
Remote control commands
Common commands
349