Emerson R&S SGT100A User Manual page 195

®
R&S SGT100A
The "Shaping > Shaping Table" confirms that the newly created file is assigned.
6. Select "Shaping Table > MyLUT > Edit"
7. Define the value pairs "Vin/Vmax" and "Vcc/Vmax". The order is uncritical.
8. Select "Save".
The instrument loads the configured values automatically and displays the shaping
function.
9. Select "Shaping Settings > Interpolation > Linear (Voltage)".
The display confirms the used interpolation.
The remote commands required to define these settings are described in
ter 10.14.13, "SOURce:IQ:OUTPut:ENVelope
Settings:
Vin/Vmax, Vcc/Vmax/Power (dBm), Vcc
Fill Table
Goto, Edit, Save As,
Vin/Vmax, Vcc/Vmax/Power (dBm), Vcc (V)
Sets the normalized values of the value pairs.
"Vin/Vmax, Vcc/Vmax"
"Power(dBm), Vcc(V)"
Remote command:
n.a.
Fill Table Automatically
Standard function for filling a table automatically with user-defined values.
"From / Range"
"Select Column to Fill"
"Start / End Value"
"Increment"
"Fill"
Goto, Edit, Save As, Save
Standard functions for editing of data lists.
Changed and unsaved values are displayed on a yellow background.
User Manual 1176.8674.02 ─ 12
Automatically................................................................................................195
Save...........................................................................................195
Value pairs in "Envelope Voltage Adaptation > Manual/Auto Normal-
ized" mode.
Value pairs in "Envelope Voltage Adaptation > Auto Power" mode.
Defines the start line and number of the rows to be filled.
Selects the respective value, including the unit.
Default values corresponding to the selected column.
Determines the step size.
Fills the table.
Fill both columns and then save the list. Otherwise the entries are
lost.
Signal generator settings
Generation of envelope tracking signals
commands", on page 485.
(V)............................................................... 195
Chap-
195