Operator Seat; General; Suspension Seat - jcb JS300 Service Manual

General

CAUTION Position the seat so that you can comfortably reach the machine controls. Do not adjust the seat
while the machine is moving. You could have an accident if you operate the machine with the seat in the
wrong position.
The operator's seat can be adjusted for your comfort. A correctly adjusted seat will decrease the operator
fatigue.
Adjust the seat so that you can comfortably reach the machine controls.
For driving the machine, adjust the seat so that you can push the pedals fully down when your back is against
the seat back.
Stop using the machine if the operators seat becomes defective. Repair or replace the seat before using the
machine again.

Suspension Seat

Seat Adjustments
Cushion Tilt
Lift the cushion tilt lever and use your weight to adjust the height of the front of the cushion as required. Release
the lever.
Cushion Slide
Lift the cushion slide lever and slide the cushion into the required position. Release the lever.
Armrest
To position the armrests, turn the armrest adjusters on the underside of each armrest.
Backrest
Lift the backrest lever and move the backrest to the required angle. Release the lever.
Weight
Turn the suspension adjuster or the push/pull lever to increase or decrease the suspension of the seat to match
the operator weight. Check the indicator.
Console Fore/Aft
Lift the console fore/aft lever and slide the console into the required position. Release the lever. Make sure
the console is locked in position.
Lumbar
Turn the lumbar adjuster to increase or decrease the lumbar support.
40

Operator Seat

9831/1100-2
Operation
Operator Seat
40