Table of Contents
Advertisement
The Operator Manual
!M
WARNING
You and others can be killed or seriously injured if you
operate or maintain the machine without first studying
the Operator Manual. You must understand and follow
the instructions in the Operator Manual. If you do not
understand anything, ask your employer or JCB
dealer to explain it.
INT-1-4-2
Do not operate the machine without an Operator Manual,
or if there is
anything on the machine you do not
understand.
Treat the Operator Manual as part of the machine. Keep it
clean and in good condition. Replace the Operator Manual
immediately if it is lost, damaged or becomes unreadable.
1
Safety Notices
Important Information
T1-042
Safety Warnings
In this publication and on the machine, there are safety
notices. Each notice starts with a signal word. The signal
word meanings are given below.
Denotes
precautions are not taken, it is highly probable that the
operator (or others) could be killed or seriously
injured.
INT-1-2-1
Denotes a hazard exists. If proper precautions are not
taken, the operator (or others) could be killed or
seriously injured.
INT-1-2-2
Denotes a reminder of safety practices. Failure to
follow these safety practices could result in injury to
the operator (or others) and possible damage to the
machine.
INT-1-2-3
9821-0650-3
Find manuals at https://best-manuals.com
This
safety
alert
system
important
safety
messages
manual. When you see this symbol, be
alert, your safety is involved, carefuly
read the message that follows, and inform
other operators.
!M
DANGER
an
extreme
hazard
exists.
!M
WARNING
!M
CAUTION
identifies
in
this
If
proper
1
Advertisement
Table of Contents
