Maintenance Introduction General; Owner/Operator Support; Service/Maintenance Agreements - jcb JS300 Service Manual

Maintenance
Introduction
Maintenance
Introduction
General
Your product has been designed and built to give maximum performance, economy and ease of use under a
wide variety of operating conditions. Prior to delivery, your product was inspected both at the factory and by
your dealer to make sure that it reaches you in optimum condition. To maintain this condition and trouble free
operation it is important that the routine services, as specified in this manual, are done by an approved JCB
dealer at the recommended specified intervals and it is recommended that this is done by an approved JCB
dealer using genuine JCB parts.
This section of the manual gives full details of the service requirements necessary to maintain your JCB product
at peak efficiency. A service manual for your product is available from your JCB dealer. The service manual
contains information on how to repair, disassemble and assemble your product correctly.
It can be seen from the service schedules on the following pages that many essential service checks must only
be done by a JCB trained specialist competent person. Only the Your JCB dealer service engineers have been
trained by JCB to do such specialist tasks, and only the JCB dealer service engineers are equipped with the
necessary special tools and test equipment to do such tasks, thoroughly, safely, accurately and efficiently.
JCB regularly updates its dealers to advise them of any product developments, changes in specifications and
procedures. Therefore only a JCB dealer is fully able which makes them best placed to maintain and service
your product.
A service record sheet or book is provided which will enable you to plan your service requirements and keep a
service history record. It must be dated, signed and stamped by your dealer each time your product is serviced.
Remember, if your product has been correctly maintained, not only will it give you improved reliability but its
resale value will be greatly enhanced.

Owner/Operator Support

JCB together with your dealer wants you to be completely satisfied with your new JCB product. However, if
you do have a problem, you can contact your dealers service department who are there to help you!
You will have been given the names of the relevant service contacts at your dealer when the product was
supplied.
To get the most from your dealer please help them to satisfy you by:
1. Giving your name, address and telephone number.
2. Quoting your product model and serial number.
3. Date of purchase and hours of work.
4. Nature of the problem.
Remember, only your JCB dealer has access to the vast resources available at JCB to help support you. In
addition, your dealer is able to offer a variety of programmes covering warranty, fixed price servicing, safety
inspections, including weight tests, covering both legal and insurance requirements.

Service/Maintenance Agreements

To help plan and spread the costs of maintaining your product, we strongly recommend you take advantage
of the many service and maintenance agreements your dealer can offer. These can be tailor made to meet
your operating conditions, work schedule etc.
Please consult your JCB dealer for details.
171 9831/1100-2 171