General
When moved to their maintenance position, the access panels give you access to parts or areas of the machine
that are not required during machine operation.
Before you operate the machine, make sure that all of the access panels are correctly in their closed or installed
positions.
Battery Cover
Open
1. Make the machine safe.
Refer to: Maintenance > Maintenance Positions > Maintenance Position (Excavator Arm Lowered)
(Page 184).
2. Use the ignition key to unlock the cover.
3. Pull the handle to release the latch.
4. Open the cover until it latches in position.
A
Lock
B
Handle
C
Cover
Close
1. To release the latch pull it up.
2. Close the cover.
3. Make sure the cover is closed correctly.
4. Use the ignition key to lock the cover.
Engine Compartment Cover
Open
1. Make the machine safe.
191
Access Apertures
Figure 212.
C
9831/1100-2
Maintenance
Access Apertures
A
B
191