jcb JS300 Service Manual page 857

Fig 37.
8 Attach slings to support the ram.
Fig 38.
9 Remove the nuts and bolts from the cylinder end of
the ram, push out the pin using a bar and hammer. Lift
the ram clear.
E-196
You can be injured by flying metal splinters when
driving metal pins in or out. Use a soft faced hammer
or copper pin to remove and fit metal pins. Always
wear safety glasses.
INT-3-1-3_2
803170
Replacement
1 Attach slings and lift the ram onto the boom.
803180-1
9813/5100-1
Section E - Hydraulics
Hydraulic Rams
Removal and Replacement
!M
WARNING
Metal Splinters
Fig 39.
803200-1
E-196