jcb JS300 Service Manual page 91

General
The installed switches and their positions can change according to the specification of the machine.
Each switch has a graphic symbol to show the function of the switch. Before you operate a switch, make sure
that you understand its function.
The rocker switches have two or three positions (as shown).
If the switch has a backlight, then the graphic symbol illuminates when the ignition switch or side lights are
in the on position.
The light bar illuminates to show that the switch function is active.
A Graphic symbol
B Light bar
Work Lights
Beacon
Refer to: Operation > Preparing for Travel > Beacon (Page 58).
Seat Heater
16
Console Switches
A
B
Three position rocker switch. The switch functions operate when the ignition switch is
in the on and off positions.
Position : 1 = Off
Position : 2 = Boom and toolbox work lights on
Position : 3 = Boom, toolbox and counterweight work lights on.
Two or three position rocker switch. The switch functions operate when the ignition
switch is in the on and off positions.
Position : 1 = Off
Position : 2 = Cab beacon on
Position : 3 = Cab and two rear beacons on (option).
Two position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Heater off, suspension adjustment on
Position : 2 = Heater on, suspension adjustment off.
Figure 13.
1
2
3
9831/1100-2
About the Product
Console Switches
16