Lubrication; General; Preparation - jcb JS300 Service Manual

General

CAUTION Waxoyl contains turpentine substitute which is flammable. Keep flames away when applying
Waxoyl. Waxoyl can take a few weeks to dry completely. Keep flames away during the drying period.
Do not weld near the affected area during the drying period. Take the same precautions as for oil to keep
Waxoyl off your skin. Do not breathe the fumes. Apply in a well-ventilated area.
You must grease the machine regularly to keep it working efficiently. Regular greasing will also lengthen the
machine's working life.
Refer to the individual condition checks throughout the Maintenance section.
Maintenance Schedules > Pre-start Cold Checks, Service Points and Fluid Levels (Page 179).
The machine must always be greased after pressure washing or steam cleaning.
Greasing must be done with a grease gun. Normally, two strokes of the grease gun is sufficient. Stop greasing
when fresh grease appears at the joint.
Use only the recommended type of grease. Do not mix different types of grease, keep them separate.
to: Technical Data > Fluids, Lubricants and Capacities (Page 262).
Attach the dust caps after greasing (if installed).

Preparation

Make the machine safe.
Arm Lowered) (Page 184).
You can complete the greasing procedures with the excavator lowered.
196

Lubrication

Refer to: Maintenance > Maintenance Positions > Maintenance Position (Excavator
9831/1100-2
Maintenance
Lubrication
Refer to: Maintenance >
Refer
196