Warming Up - jcb JS300 Service Manual

8. If an incorrect security code is entered a red locked padlock is displayed. Turn the ignition key to the off
position and repeat steps 2 to 5. A divided bar under the PIN numbers shows the number of tries left.
8.1. After five failed tries the system will lock.
Duration: 15min
8.2. A red locked padlock is displayed with a minute timer. For the time to expire the ignition must be left on.
Arm the Immobiliser
1. Stop the engine.
2. Remove the ignition key. The immobiliser arms automatically after the time specified.
Duration: 2min
3. If you restart the engine within the time, the system disarms automatically.
Add/Change/Delete a Security Code
Immobiliser codes can only be added, changed or deleted using JCB Servicemaster software. Contact your
local JCB dealer.

Warming Up

Before starting work in temperatures below -15°C (5.0°F), the hydraulic fluid must be warmed.
1. Warm up the engine.
1.1. Start the engine.
1.2. Do not operate any services.
2. After the warm up period make sure that everyone is clear of the machine.
3. Warm up the hydraulic oil.
3.1. Increase the machine power to maximum.
54
Figure 42.
Figure 43.
9831/1100-2
Operation
Starting the Engine
54