Hydraulic Compartment Cover - jcb JS300 Service Manual

Refer to: Maintenance > Maintenance Positions > Maintenance Position (Excavator Arm Lowered)
(Page 184).
2. Use the ignition key to unlock the cover.
3. Pull the handle to release the latch. The cover opens automatically and is supported on a gas strut.
4. Ensure the support bar has fully engaged.
A Lock
B Handle
C Cover
Close
1. Hold the weight of the cover and pull the support bar towards you.
2. Push the cover down.
3. Make sure the cover is closed correctly.
4. Fasten the latches.
5. Use the ignition key to lock the cover.

Hydraulic Compartment Cover

Open
1. Make the machine safe.
Refer to: Maintenance > Maintenance Positions > Maintenance Position (Excavator Arm Lowered)
(Page 184).
2. Use the ignition key to unlock the cover.
3. Pull the handle to release the latch.
4. Open the cover until it latches in position.
192
Figure 213.
B
C
9831/1100-2
Maintenance
Access Apertures
A
192