jcb JS300 Service Manual page 159

Operation
Instruments
Overload caution enabled (green)
Scrap magnet (amber)
Throttle recalibrate (amber). Informs the operator that they must calibrate the
throttle in order to control the engine speed.
Engine shutdown (red)
Service event (amber). When a service is required the service symbol is dis-
played and the fault indicator is illuminated amber. They remain on even when
the operator turns the ignition switch off and on. The service should be per-
formed by your JCB dealer. The symbol and fault indicator can only be cancelled
by your JCB dealer.
Engine oil change event (amber). When an engine oil change is required the oil
change symbol is displayed and the fault indicator is illuminated amber. They re-
main on even when the operator turns the ignition switch off and on. The opera-
tor can perform the oil change and then cancel the symbol and fault indicator by
pressing the enter button. When the operator has pressed the enter button, the
display will set the time for the next service event from the time when the enter
button was pressed.
Diesel particulate filter regeneration (green). Auto regeneration mode active.
Displayed for 5 seconds in the left side of the screen then in the tray.
Diesel particulate filter regeneration (amber). Manual regeneration required.
Diesel particulate filter regeneration (red). Regeneration mode required. Engine
low power.
Seat belt/occupancy (red)
84 9831/1100-2 84