jcb JS300 Service Manual page 112

3. To release the sunblind, hold the handle, release the bottom edge of the sunblind from the hooks and let
the sunblind slowly rewind back into the stowed position.
A Handle
B Front hooks
C Upper hooks
Optional Sunblind - Half Length
The sunblind is installed at the top of the cab front window and can be secured in a position to suit the operator:
1. Use the handle in the centre of the sunblind lower edge to pull the sunblind down to the required position.
The sunblind will hold itself in position.
2. To release the sunblind, gently pull the hoop, while holding the handle and let the sunblind slowly rewind
back into the stowed position.
A Handle
B Hoop
37
Figure 27.
C C
A
B
B B
Figure 28.
A
B
9831/1100-2
Operation
Sun Visor/Sunblind
37