Windows; Front Window - jcb JS300 Service Manual

Front Window

Depending on machine specification, windows are provided to function as guards. Damaged windows must be
replaced with those of equivalent specification before the machine is used again.
Is is the responsibility of the operator to assess whether the attachment they are using and/or the operation
they are performing requires the protection offered by a screen.
Keep the windows closed when there is a risk of flying debris.
Opening and Closing the Front Upper Window
CAUTION Take care when raising and lowering the window. Lower your head as you pull the window back.
Isolate the hydraulic controls before opening and closing the window.
To open the window:
1. Hold the handles, press and hold down the buttons.
2. Use the handles to lift the window into a position parallel with the roof.
3. Release the buttons to hold the window in position. Make sure the window locates on the latches in the
cab roof.
B
A
A Handles
B Buttons
C Latches
To close the window:
1. Hold the handles, press and hold down the buttons.
2. Use the handles to pull the window into a vertical position.
3. Release the buttons to hold the window in position. Make sure the window locates on the latches in the
cab front.
Removing and Installing the Front Window Lower Panel
When the lower window is removed it must be securely stowed behind the operator seat in its correct stowage
position.
Before the lower window is removed, turn the ignition off and isolate the machine hydraulics.
> Locks > Control Lock (Page 59).
33

Windows

Figure 21.
C
9831/1100-2
C
Refer to: Operation
Operation
Windows
B
A
33