jcb JS300 Service Manual page 123

Cab Mirrors - Position A and B
Secure the mirror to the handrail:
1. Secure the mirror support to the handrail with the cap-screws and nuts.
2. Remove the protective cap from the back of the mirror and tighten the nut to secure the mirror to the support.
3. Replace the protective cap after the adjustment.
Do not fully tighten the fittings until the mirrors are adjusted correctly.
D
Cap-screw
E Nut
F Protective cap
Rear Mirror - Position C
Secure the mirror to the counterweight:
1. Remove the bolt from the mounting lug on the counterweight.
2. Use the bolt, spring washer and washer to secure the mirror support to the counterweight.
3. Remove the protective cap from the back of the mirror and tighten the nut to secure the mirror to the support.
4. Replace the protective cap after the adjustment.
Do not fully tighten the fittings until the mirror is adjusted correctly.
48
Figure 37.
F
9831/1100-2
D,E
Operation
Mirrors
48