jcb JS300 Service Manual page 145

Main Display Screens
After the engine has been started the operator can select one of three main display screens using the control
wheel. Turn the rotary control right or left to navigate the screens.
Default Operating Screen (Home Screen)
Displays the engine speed, inside and outside air temperature, selected travel speed, time, isolator status.
A Travel speed
B Auto idle/Controls isolation
C Clock
D Inside/outside temperature, Fan speed, A/C
E Engine speed
F Power band
Customisation of the Home Screen
To personalise the split screen home screen:
1. Press the home button to display the home screen.
2. Press the home button again. A split screen with the right side highlighted is displayed.
3. Use the rotary controller to choose the right side split screen.
4. Press select to confirm. A split screen with the left side highlighted is displayed.
5. Use the rotary controller to choose the left side split screen.
6. Press select to confirm.
If either side of the screen is left blank then the home screen shall revert to a single screen.
Second Level Display Screens
Pressing the control wheel on any one of the three main display screens will take the operator to the second
level display screens. Turn the rotary control right or left to navigate the screens.
70
Figure 65.
F
A
E
D
9831/1100-2
B
C
Operation
Instruments
70