Fig 19.
18
by using a puller and stopper, remove the bearing
outer ring.
Fig 20.
19
Turn the gearbox over. By using a puller and stopper,
remove the bearing outer ring.
E-158
C069700
C069710
K Fig 21. ( T E-158)
9813/5100-1
Section E - Hydraulics
Fig 21.
20
using a rubber hammer and stopper, remove the seal
ring from the gearbox housing.
Fig 22.
21
Remove the spacer ring from the pinion shaft.
K Fig 23. ( T E-159)
Swing Gearbox
Dismantling and Assembly
C069720
C069730
E-158