Maintenance
Electrical System
1. Isolate the machine electrics.
Refer to: Operation > Battery Isolator (Page 128).
2. Make sure that the machine electrics are isolated.
A defective isolator must be repaired before the machine is used. For more information, contact your JCB
dealer.
Fuses
Replace
NOTICE Always replace fuses with ones of correct ampere rating to avoid electrical system damage.
The electrical circuits are protected by fuses. If a fuse blows, find out why before a new one is installed. For
more information on the individual
fuses:Refer to: Technical Data > Electrical System > Fuses (Page 273).
Fuses - Cab
The fuses are installed in the rear stowage area. Open the cover to get access to the fuses.
For fuse identification, a label is attached to the rear of cover.
Figure 236.
A
A
Cover
Fuses - Battery Bay
The fuses are installed in the battery bay. Remove the cover and open the box to get access to the fuses.
226
9831/1100-2
226