jcb JS300 Service Manual page 852

Fig 22.
9 Lift the ram away from the unit.
E-191
Replacement
1 Attach slings to the ram.
Align the ram to its installation position.
803223-1
2 Install the pin and then the bolt and nuts.
You can be injured by flying metal splinters when
driving metal pins in or out. Use a soft faced hammer
or copper pin to remove and fit metal pins. Always
wear safety glasses.
INT-3-1-3_2
9813/5100-1
Section E - Hydraulics
Hydraulic Rams
Removal and Replacement
Fig 23.
!M
WARNING
Metal Splinters
803224-1
E-191