Fuel Filter - jcb JS300 Service Manual

Refer to: Maintenance > Service Points > General (Page 185).
3. Clean the exterior of the cap with a clean cloth.
4. Remove the fuel filler cap.
5. Clean the interior of the fuel filler cap with a clean cloth.
6. Install the fuel filler cap.

Fuel Filter

Replace
Primary Fuel Filter
1. Make the machine safe.
Refer to: Maintenance > Maintenance Positions (Page 184).
2. Get access to the filter.
Refer to: Maintenance > Service Points (Page 185).
3. Drain and remove the separator bowl.
4. Replace the fuel filter.
5. Install the separator bowl.
6. Bleed the fuel system.
Refer to: Maintenance > Fuel System > General > Bleed (Page 209).
A Filter
B Bowl
Main Fuel Filter
1. Make the machine safe.
Refer to: Maintenance > Maintenance Positions (Page 184).
2. Get access to the fuel filter.
Refer to: Maintenance > Service Points (Page 185).
3. Loosen the air bleeder plug and open tap to drain fuel from the filter into a suitable container.
211
Figure 227.
A
B
9831/1100-2
Maintenance
Fuel System
211