Refuelling Pump - jcb JS300 Service Manual

Section C - Electrics
Engine and Power Control

Refuelling Pump

Refuelling Pump
Location
The refuelling pump 1 is mounted inside the machine
toolbox compartment.
1
2
C128830
Fig 57.
Overview
The refuelling pump is operated by a momentary switch
located in the machine toolbox.
The refuelling pump can be used in two different modes:
automatic or manual refill.
Automatic refill mode enables automatic shut off of the
refuelling pump when the fuel in the fuel tank reaches a
pre-set percentage of the total capacity. The fuel quantity
can be set by the operator so as to allow a safe maximum
fuel level when the machine is on uneven ground.
The manual refill mode allows operation of the refuelling
pump by manually holding the refuelling switch down.
C-119 9813/5100-1 C-119