3. Stop the engine.
4. Turn the ignition key to the on position.
5. Operate the hydraulic controls several times to release any residual hydraulic pressure in the system.
Refer to: Operation > Moving a Disabled Machine > Excavator Arm (Emergency Operation) (Page 133).
6. Turn the ignition key to the off position.
7. Raise the controls lock lever.
8. Open the cab door and latch it in the open position.
9. Hold the left handrail and turn your back towards the step. Refer to Figure 17.
A
Handrails
B
Step
C
Track
10. Hold both of the handrails and use the track and step to climb down backwards from the cab onto the
ground.
11. Close the cab door.
29
Figure 17.
C
C
B
9831/1100-2
Entering and Leaving the Operator Station
A
B
Operation
29