This section details the allocation of wire numbers and the
identification of wires in the wiring harness.
K Fig 30. ( T
C-189). The illustration shows a typical
connector and wires. Each wire has an individual
identification number permanently marked on it, at regular
intervals along it's length.
Ident. No.
Description
#
The # indicates the start of the identification number. It is always printed to the left of the identification
number.
8191
The wire's unique identification number. The wire functions and numbers allocated to them are consistent
through out the JCB range of products.
C-189
Wire Numbers and Functions
Fig 30. Typical Wire Number
Table 18. Wire Identification
K Wire Numbers and Functions ( T
9813/5100-1
Section C - Electrics
Wire Numbers and Functions
The number stamped on the wire identifies the following:
Harness Systems
S164111-C1
C-189).
C-189